If you are looking to getting into chainsaw carving please read this post on arbtalk here.

 

Chainsaw carving is NOT like standard chainsaw use – ie. you can’t simply strap on a carving bar and do carving – we broke our first carving bar and shortly after broke the chainsaw… please learn by our mistakes! We did not follow the below..

 

  1. Chain is SLACK – no where near as tight as a standard bar, it should be hanging off the underside of the bar
  2. R7 bars running 1/4 .043 are SUPER delicate and only used for very fine detail work
  3. Carving is mainly done with the saw at half throttle [or thereabouts] – very different from standard work where most cuts are with full throttle
  4. Carving bars take longer to bed in – run them gently and ensure they don’t get hot for the first couple of tanks [which means carve for a minute – rest a minute – carve for a minute = rest for a minute… ]
  5. Take the heels of the cutter teeth to reduce friction [Stihl 3661-13RMS already has this feature] but click here to see more on this.

 

[U1-NS] CCQ-C1-16-50 Cannon Carving Quarter Tip 16″ [40cm] 3/8 Lo Pro .050 60 drive links or .325 .050 66 drive links or 1/4″ .050 86 drive links

$248.34

Add to
Stock 22
Part Number CCQ-C1-16-50
Weight 0.591g
Part Number CCQ-C1-16-50 Categories: ,
Durability
Stiffness
Cut speed

Made from formulated, cold rolled, annealed, heat treated, surface ground, and stress relieved steel. This provides the best possible characteristics of wear resistance, strength, durability, straightness and elasticity.

The Cannon SuperBar power plus profile maximizes cutting power and chain speed while reducing damage from loose chain.

A precision ground groove to within .002″ means straighter cuts. Each groove is individually centered for even rail wear and superior durability. This increases rail strength and reduces damage from pinches. Also, if the chain rides exactly square to the rail, the result is smoother and straighter cutting. Milling marks, commonly found in the competitions bars, are eliminated. Thus, the groove is tighter and sloppy chain travel occurs much less.

Cannon SuperBars have flame tempered rails that are hardened to 5 points more than the tie straps on the chain for much longer bar life. This hardening penetrates deep to allow for multiple bar repairs and rebuilds. With the chain running straight and true, the result is a faster and smoother cut.


Product Highlights

    • Available in .325″, .375″ or .404″ pitch single rivet sprocket noses
    • Motor mounts available for most makes and models of chainsaws
    • Precision squared and flame hardened rails
    • Stress relieved heel prevents cracking and reduces vibration
    • Available in .050, .058 or .063 gauge
    • Available in lengths from 16 to 84 inches
    • Precision ground groove

 

Checkout these videos to get more a flavour of how carving works

 

‘Cannon bars are awesome. I wish I’d have brought this small one much sooner’  Samantha Possinger

‘Well – they always seem to last the longest. Cannon are the best. This one’s going on my Stihl MS201’ Ant Beetlestone

‘All round reliability’  Lorraine Botterill

‘I’m currently replacing all my bars for Cannon bars…in my opinion they’re the best’ Rolande Urwin

Additional information

Weight 0.591 g

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
L
Luke Owen Chapman
Cannon 16” 1/4 tip

I’ve used cannon bars daily for a number of years now. The 16” is my most used bar, and the last two have been dime tips. These have been great but wear fast on a Husqy 550, so a 1/4 tip is a better option for my use. These bars are very durable, and have a direct and solid feel which I can depend on.

A
Andrew Noble

Cannon Carving Quarter 16" [40cm] 3/8 Lo Pro .050 58 drive links or .325 .043 67 drive links or 1/4" .050 85 drive links

S
Steve Hey

CCQ-C1-16-50 Cannon Carving Quarter Tip 16" [40cm] 3/8 Lo Pro .050 58 drive links or 1/4" .050 85 drive links[x7 Expected 06 April 2021]

S
Samantha P.

Cannon bars are awesome. I wish I’d have brought this small one much sooner

Chains that match

  • 4.0mm[5/32″] Diamond Coarse – Sharpens 3/8 Lo Pro and 1/4 Chains [New Style]

    Part Number DS G532CHPC-ES
    $15.28
    Add to
  • 4.0mm[5/32″]Diamond Fine – Sharpens 3/8 Lo Pro and 1/4 Chains [New Style]

    Part Number DS G532CHPF-ES
    $15.28
    Add to
  • Oregon wooden file handle

    534370 Oregon Wooden File Handle

    Part Number 534370
    $4.20
    Add to
  • 56050071027 Stihl Filing Pouch with 4.0mm[5/32″] Sharpens 1/4 & 3/8 Lo Pro Chains

    Part Number 56050071027
    $51.20
    Add to
  • Stihl 2 in 1 easy file 4mm(5/32")

    56057504303 Stihl 2 In 1 Easy File 4.0mm[5/32″] Sharpens 1/4 & 3/8 Lo Pro Chains

    Part Number 56057504303
    $75.32
    Add to
  • 56057504306 Stihl 2 In 1 Easy File 3.2mm[1/8"] Sharpens 1/4 .043 Picco Chain

    56057504306 Stihl 2 In 1 Easy File 3.2mm[1/8″] Sharpens 1/4 .043 Picco Chain

    Part Number 56057504306
    $75.32
    Add to
  • Stihl file holder and file 4mm(5/32")

    56057504327 Stihl File Holder + File 4.0mm[5/32″] Sharpens 1/4 & 3/8 Lo Pro Chains

    Part Number 56057504327
    $17.10
    Add to
  • Stihl wooden file handle

    8114907860 Stihl Wooden File Handle

    Part Number 08114907860
    $4.32
    Add to
  • A4.0 4.0mm[5/32″] Carbide Sharpening Burr – Sharpens 3/8 Lo Pro and 1/4 [Trial price]

    Part Number A4.0
    $11.46 Out of Stock
  • G417-3 3x Stones Pack Granberg filing stones 4mm(5/32") (Copy)

    G417-3 3x Stones Pack Granberg filing stones 4.0mm[5/32″]

    Part Number G417-3
    $12.61
    Add to
  • LC10081-532 Vallorbe File Holder + File 4.0mm[5/32″] Sharpens 1/4 & 3/8 Lo Pro Chains

    Part Number LC10081-532
    $19.03
    Add to
  • LZ-4.0MM Lazy File 4.0mm[5/32″] Sharpens 1/4 & 3/8 Lo Pro Chains

    Part Number LZ-4.0MM
    $37.82 Out of Stock
  • Oregon 4mm(5/32") chainsaw file

    Oregon 4.0mm[5/32″] Chainsaw Files x12 – Files 3/8 Lo Pro and 1/4 Chains

    Part Number 70504
    $27.70
    Add to
  • Oregon file holder and file 4mm(5/32")

    Oregon File Holder and File 4.0mm[5/32″] – Files 3/8 Lo Pro and 1/4 Chains

    Part Number Q16265C
    $16.81
    Add to
  • Oregon Pouch with 4.0mm[5/32″] – Files 3/8 Lo Pro and 1/4 Chains

    Part Number 558488
    $28.56
    Add to
  • Panther Diamond 4.0mm[5/32″] Chainsaw File x1 – Files 3/8 Lo Pro and 1/4

    Part Number 4MM-532-DIA
    $11.46
    Add to
  • Vallorbe 4mm(5/32") chainsaw file

    Vallorbe 4.0mm[5/32″] Chainsaw Files x12 – Files 3/8 Lo Pro and 1/4 Chains

    Part Number LC10003-03-532
    $37.82
    Add to
  • Vallorbe plastic file handle with file angles

    Vallorbe Plastic File Handle with File Angles

    Part Number AL240
    $6.30
    Add to
Please email or call us +44 (0)1590 681259 for sprockets for this chainsaw
Translate »

Orders for United States of America must be a minimum of $180.

For all UK orders from Monday 25th Sept there will be no longer be a minimum order but a flat rate of £4.95+vat will be charged to all orders.

Click here for more info for shipping costs