scroll down for chains files accessories


Fits the following chainsaws:

HUSQVARNA

61, 64, 65, 66, 70, 77, 160, 162, 163, 180, 181, 185, 260, 263, 266, 268, 272, 280, 281, 285, 288, 298, 365, 365XP, 371, 372XP, 380, 385XP, 390XP, 394XP, 395XP, 562XP, 575XP, 576XP

Cannon (starts) H1
GB (starts) HV
Husqvarna (starts) 585-950
Oregon (ends) D009
Sugihara (starts VT2 or VT3)


[H4-18] CSM-H1-18-58-3 Cannon Superbar 18″[45cm] 3/8 .058 66 drive links

$244.64

Add to
Stock 3
Part Number CSM-H1-18-58-3
Weight 1.044g
Part Number CSM-H1-18-58-3 Categories: ,
Durability
Stiffness
Cut speed

CAUTION – You will need a 3/8 lo pro drive rim/spur sprocket to run this bar – if you are unsure on how to check and change your drive sprocket then this bar is unlikely to be for you. To learn how to do this check our videos and Essential Info.

Made from formulated, cold rolled, annealed, heat treated, surface ground, and stress relieved steel. This provides the best possible characteristics of wear resistance, strength, durability, straightness and elasticity.

The Cannon SuperBar power plus profile maximizes cutting power and chain speed while reducing damage from loose chain.

A precision ground groove to within .002″ means straighter cuts. Each groove is individually centered for even rail wear and superior durability. This increases rail strength and reduces damage from pinches. Also, if the chain rides exactly square to the rail, the result is smoother and straighter cutting. Milling marks, commonly found in the competitions bars, are eliminated. Thus, the groove is tighter and sloppy chain travel occurs much less.

Cannon SuperBars have flame tempered rails that are hardened to 5 points more than the tie straps on the chain for much longer bar life. This hardening penetrates deep to allow for multiple bar repairs and rebuilds. With the chain running straight and true, the result is a faster and smoother cut.


Product Highlights

  • 3/8″ pitch .050″ gauge
  • 3/8″ low profile .050″ gauge
  • 3/8″pitch .063″ gauge
  • .404″pitch .063″ gauge
  • And the lengths are:  20″ and 24″

The unique features of the Carpenter Bars is that they have a very narrow profile and the bars have parallel rails; this means that the bottom of the cut is straight which is a big help when it comes to finishing and joining  lumber or logs together.

There are two sizes as well; one that cuts a 3″ top to bottom plunge cut hole and another that cuts a 4″ hole.

Also with the 3″ version, due to its very narrow profile it can be used for making curved cuts such as you might see over an arched door threshold in a log cabin.


‘Cannon bars are awesome. I wish I’d have brought this small one much sooner’  Samantha Possinger

‘Well – they always seem to last the longest. Cannon are the best. This one’s going on my Stihl MS201’ Ant Beetlestone

‘All round reliability’  Lorraine Botterill

‘I’m currently replacing all my bars for Cannon bars…in my opinion they’re the best’ Rolande Urwin

 

Additional information

Weight 1.044 g

Chains that match

  • 00007504300 Stihl 2 In 1 Easy File 5.5mm[7/32"] Sharpens .404 Chains

    00007504300 Stihl 2 In 1 Easy File 5.5mm[7/32″] Sharpens .404 Chains

    Part Number 00007504300
    $77.17
    Add to
  • 3 pack Granberg filing stones 5.5mm(7/32")

    3x Stones Pack Granberg filing stones 5.5mm[7/32″] – Grinds .404 and 3/8 Chains

    Part Number G419-3
    $12.92
    Add to
  • 5.2mm[13/64″] Diamond Coarse – Sharpens 3/8 Chains [New Style]

    Part Number DS G1364CHPC-ES
    $15.66
    Add to
  • 5.2mm[13/64″] Diamond Coarse – Sharpens 3/8 Chains [Old Style]

    Part Number DS G1364CHPC
    $31.31
    Add to
  • 5.2mm[13/64″] Diamond Fine – Sharpens 3/8 Chains [Old Style]

    Part Number DS G1364CHPF
    $31.31
    Add to
  • 5.5mm[7/32″] Diamond Coarse – Sharpens .404 and 3/8 Chains [New Style]

    Part Number DS G732CHPC-ES
    $15.66 Out of Stock
  • 5.5mm[7/32″] Diamond Fine – Sharpens .404 and 3/8 Chains [New Style]

    Part Number DS G732CHPF-ES
    $15.66
    Add to
  • Oregon wooden file handle

    534370 Oregon Wooden File Handle

    Part Number 534370
    $4.31
    Add to
  • 56050071029 Stihl Filing Pouch with 5.2mm[11/64″] Sharpens 3/8 Chains

    Part Number 56050071029
    $52.45
    Add to
  • Stihl 2 in 1 easy file 5.2mm

    56057504305 Stihl 2 In 1 Easy File 5.2mm[13/64″] Sharpens 3/8 Chains

    Part Number 56057504305
    $77.17
    Add to
  • Stihl file holder and file 5.2mm

    56057504329 Stihl File Holder + File 5.2mm[13/64″] Sharpens 3/8 Chains

    Part Number 56057504329
    $17.52
    Add to
  • 56070071000 Stihl HEXA ONLY Filing Pouch Sharpens 3/8 HEXA Chains

    Part Number 56070071000
    $66.15
    Add to
  • 601981 Oregon Chainsaw Tool Kit Complete

    Part Number 601981
    $58.62
    Add to
  • Stihl wooden file handle

    8114907860 Stihl Wooden File Handle

    Part Number 08114907860
    $4.42
    Add to
  • A5.5 5.5mm[7/32″] Carbide Sharpening Burr – Sharpens .404 and 3/8 Chains [Trial price]

    Part Number A5.5
    Original price was: $23.49.Current price is: $11.74. Out of Stock
  • Oregon file holder and file 5.5mm(7/32")

    Oregon File Holder and File 5.5mm[7/32″] – Files .404 and 3/8 Chains

    Part Number Q13252C
    $17.22
    Add to
  • Vallorbe 5.2mm (13/64") chainsaw file

    Vallorbe 5.2mm[13/64″] Chainsaw Files x12 – 3/8 Chains

    Part Number LC10000-03-1364
    $38.75
    Add to
  • Vallorbe plastic file handle with file angles

    Vallorbe Plastic File Handle with File Angles

    Part Number AL240
    $6.46
    Add to
Please email or call us +44 (0)1590 681259 for sprockets for this chainsaw
Translate »

Orders for United States of America must be a minimum of $180.

For all UK orders from Monday 25th Sept there will be no longer be a minimum order but a flat rate of £4.95+vat will be charged to all orders.

Click here for more info for shipping costs