Chains are not measured by stretching them out on a bench and squinting down a tape measure – chains are identified by PITCH, GUAGE and NUMBER OF DRIVE LINKS [no – not the cutting teeth – drive links and you’ll know the difference by even a cursory look at the chain ID link above].
Bars likewise are not measured the same way – manufacturers give them a set ‘length’ which is generally the sticky out bit that comes out of the chainsaw [not including the mount unless in the case of large double ended milling bars which are the exception to the rule and measured end to end].
Chain sharpening is key – if you cannot use a chain and have it cutting well until the cutters are so small they end up getting knocked off – you have plenty to learn. Watch, research, rinse and repeat. Read our article on chain sharpening by clicking here – often people get caught up in different angles and techniques – but the principles are always the same.
If you are serious about correct maintenance of your bar and chain work your way through the Oregon manual [click here] and after that check out the Stihl equivalent [click here]. Using a chainsaw for 20 years [badly] does not qualify you as an experienced user – so be the change, make the difference and keep educating yourself about these valuable yet dangerous tools.
And finally – why buy a new bar and chain without checking/replacing the drive rim or drive sprocket? [again click here if unsure on what these refer to]. Would you change the oil on your car without changing the oil filter?
An advanced, full chisel, high-performance 3/8″ 1.5 mm chain for full-time professional forestry saws. The chain is made entirely by Husqvarna to ensure you get the best possible output from your chainsaw. With its outstanding durability and cutting efficiency, a sharpness that lasts and low stretch, it gives you better results, less need for maintenance and lower costs.
Great products, great customer service and arrived in a timely fashion
A
A.L.
The X cut seems to require sharpening less than other chains (this is my first use of the x-cut). The chain has developed a crack in te golden link after 2 weeks of use - I am assuming this is just missfortune and not suggestive of a fault with the chain.
Orders for United States of America must be a minimum of $120.
Please ensure your cart total exceeds this before checkout. We need to sell a certain value per order to cover shipping cost. Please try and group your orders together rather than little and often. Thanks from the Chainsawbars Team.