1ST-JH-S Panther BASIC Accessories 12″[30cm] Rungs STANDARD VERSION

This standard kit is more for the Panther Intersect and Panther PM48 yes you can use it on the larger mills but it’s not as ideal because those big mills really need a wider support.

Note: Until our new pre build first cut systems are in – you need to order the longer pieces that make up your first cut system separately. This means you can customise your own kit. So if you want to mill say a 500cm log – buy x4 pieces of profile that are 290cm – which gives you a total length of 580cm (you need a bit of overhang at each end).

Note that KJN take 3-5 days to process these orders and for ease of sending keep the max length to under 295cm. Order the 45mm profile here 45x45L Aluminium Extrusion – also note we are not making anything or are an affiliate of KJN – you are buying direct from them so any issues with shipping etc need to be resolved with them. We have found them to be reliable and a good supplier hence we are recommending people buy from them (and we know their profile fits our accessories). If you want to add more accessories, levelling parts, etc you’ll find these all here.

What you get:

• 4x FCH002A 4040 40mm 1st Cut System Rung 12″[30cm] STANDARD
• 16x PB-EHB-10 First Cut System External Corner Bracket [With Fixings]
• 4x PB-LJ Panther Linear Joiner [Joins Panther First Cut Lengths]
• HINGE-KIT Stainless End Joining Hinge Kit [You Get a Pair] For First Cut Systems

You need to overhang your log each end enough to be able to enter and exit the log easily.

Rungs are pre drilled to allow hex bolts to fix the set up to the log.