We have an essential info section looking at how to ID chains – why not take a look by clicking here.

Chains are not measured by stretching them out on a bench and squinting down a tape measure – chains are identified by PITCH, GUAGE and NUMBER OF DRIVE LINKS [no – not the cutting teeth – drive links and you’ll know the difference by even a cursory look at the chain ID link above].

Bars likewise are not measured the same way – manufacturers give them a set ‘length’ which is generally the sticky out bit that comes out of the chainsaw [not including the mount unless in the case of large double ended milling bars which are the exception to the rule and measured end to end].

Chain sharpening is key – if you cannot use a chain and have it cutting well until the cutters are so small they end up getting knocked off – you have plenty to learn. Watch, research, rinse and repeat. Read our article on chain sharpening by clicking here – often people get caught up in different angles and techniques – but the principles are always the same.

If you are serious about correct maintenance of your bar and chain work your way through the Oregon manual [click here] and after that check out the Stihl equivalent [click here]. Using a chainsaw for 20 years [badly] does not qualify you as an experienced user – so be the change, make the difference and keep educating yourself about these valuable yet dangerous tools.

And finally – why buy a new bar and chain without checking/replacing the drive rim or drive sprocket? [again click here if unsure on what these refer to]. Would you change the oil on your car without changing the oil filter?


22LPX Oregon Chisel .325 .063[1.6mm]

$0.46

Add to
Stock 6134
Part Number 22LPX Part Number 22LPX Category:

Please make sure you order the correct number of drive links for your bar Check you have not just ordered 1 drive link

 


An ideal chain for professional woodcutters who use .325″ pitch saws. Low-vibration, full chisel cutters offer top performance. Features & Benefits.

Note this chain is the same as the Oregon LGX chain but it has bumper kickback reducing depth gauges. Other than that the LGX and the LPX chains are identical.


  • LubriTec™ keeps your chain and guide bar oiled, for less friction and longer life
  • Blued Cutters deliver high-quality protection against corrosion
  • Top-Plate Filing Indicators makes accurate sharpening easier
  • Our Exclusive OCS-01 Steel delivers greater durability

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
C
C.B.
Chain saw chains
C
C.D.
Bar and chain
K
K.G.
A
A.
Translate »

Orders for United States of America must be a minimum of $80.

Please ensure your cart total exceeds this before checkout.