TB Table and Bench Making Kit Welded Corner Brackets

$82.51

Add to
Part Number TB Part Number TB Category:

If you want to make a table quickly and easily then use this method.

You get the following in each kit:

4x 4″ steel welded brackets

2x 6″ steel welded brackets

You will need to paint or laquer these.

Box x50 60mm hex bolts and driver.

Best if you have a mini mill already but if not can buy one here.

You don’t have to have the mini mill as you could always cut the legs by normal circular saw – just a bit more time consuming and fiddly!

You’ll need some additional mini mill rails (if using the mini mill method)

You get the plans of how to make up the table leg frame using these mini mill rails.

The frame allows you to cut the legs square and to the correct size. Assemble the table upside down with 2x 4″ barckets one side of the leg and 1x 6″ bracket the other. Job done!

Translate »

Orders for United States of America must be a minimum of $80.

Please ensure your cart total exceeds this before checkout.

select language