NOTE: With this option you get 100ft of Oregon 27RX. You DON’T get a ready made up chain with this kit. This will make x6 chains for this bar at a cost of £49.17 vat per chain [usual cost of a chain bought individually £79.92 vat]. Reduce stress, cost and drama if you write off a chain. If you don’t already have the breaking and mending equipment you can buy it here.
The other Panther Mills come with only a single chain. The Panther chainsaw mill has been designed and built by Loglogic and is sold in collaboration with www.chainsawbars.co.uk. There are a host of other chainsaw mills on the market so why make another? Answer – because it’s better in every possible way when compared to other mills on the market. We didn’t develop these mills in order to make clones or similar style mills – we wanted the next step up – AND WE DID IT!
Max depth of cut on all mills 13″[33cm] – Custom longer uprights coming soon!
PM42-GB30 Comes with a 30″[76cm] GB Lo Pro Bar running Stihl PMX Lo Pro Ripping chain and Lo Pro drive rim – max cutting width 22″[56cm]
PM42-GB36 Comes with a 36″[91cm] GB Lo Pro Bar running Stihl PMX Lo Pro Ripping chain and Lo Pro drive rim – max cutting width 28″[71cm]
PM42-GB42 Comes with a 42″[107cm] GB Lo Pro Bar running Stihl PMX Lo Pro Ripping chain and Lo Pro drive rim – max cutting width 34″[85cm]
PM48-GB48 Comes with a 48″[122cm] GB Lo Pro Bar running Stihl PMX Lo Pro Ripping chain and Lo Pro drive rim – max cutting width 40″[102cm]
PM60-GB54 Comes with a 54″[137cm] GB Extra Long Bar running Oregon 27RA Hyperskip Ripping chain – max cutting width 46″[117cm]
PM60-GB64 Comes with a 64″[163cm] GB Extra Long Bar running Oregon 27RX Hyperskip Ripping chain – max cutting width 56″[142cm]
PM70-GB74 Comes with a 74″[188cm] GB Extra Long Bar running Oregon 27RX Hyperskip Ripping chain -max cutting width 66″[168cm]
PM80-GB84 Comes with a 84″[213cm] GB Extra Long Bar running Oregon 27RX Hyperskip Ripping chain – max cutting width 76″[193cm]
For saws that fit see list at bottom of the right hand column. Most bars from 6th September, 2019 have slots in to make fitting fast and efficient and adjustable to get the max cutting width. You can fit a Panther to ANY chainsaw but you will have to drill x2 8mm holes in order to mount it.
Designed by chainsaw millers for chainsaw millers.
Re designed from the ground up – most other chainsaw mills are copied from existing designs – the Panther Mill has been re designed from scratch.
Height adjustment is tool less and fast – in fact it is the fastest compared with any other mill on the market. Simply rotate the round handle to adjust how deep the mill will cut. No need to hold a spanner in one hand while trying to adjust the mill with the other.
Attachment is the quickest of any chainsaw mill – easily bolt and unbolt your mill to your chainsaw.
Attachment to the saw is bolted not clamped – the saw can never slip in the mill.
What do you actually get for your $$
- PM-70/80 New Panther Horizon Chainsaw Mill
- 2x 80″[200cm] 45mm Profile Rails
- 1x 80″[200cm] Control Tube
- HSS84-63RQ 84″[213cm] GB Slotted Extra Long Bar
- Oregon 27RX Ripping Chain .404 .063 222 Drive Links
- PLWK Full Panther Winching Kit
- 4mm T Allen Key
- 6x M8 grub screws
The mill is designed to be used with special GB Lo Pro milling bars which are thinner and narrower than existing chainsaw bars for a faster, cleaner cut.
Panther Mills automatically come with a full winch set up to make milling 80% easier than pushing by hand.
There is a dedicated Panther First Cut System to ensure your first cut is table top flat. This first cut system can be extended and widened indefinitely. It is the best on the market today.
In the long term additional functionality will be built into the Panther Mill that currently does not exist anywhere else – but you’ll have to watch this space to see!
PM-30, PM-36, PM-42
Fits direct to Stihl saws
044, 046, MS440, MS460 (PM-30 and PM-36 only)
MS441, MS461 (PM-30 and PM-36 only)
065, MS650, MS651
064, MS640, MS641
066, MS660, MS661
Fits with an adapter here > GB912 to Husky saws as below
61, 64, 65, 66, 70, 77, 160, 162 (PM-30 and PM-36 only)
163, 180, 181, 185, 260, 263, 266 (PM-30 and PM-36 only)
268, 272 (PM-30 and PM-36 only)
280, 281, 285, 288, 298
365, 365XP, 371, 372XP, 380, 385XP
390XP, 394XP, 395XP,
572XP, 572XPG, 575XP, 576XP 603.0
PM-54, PM-64, PM74, PM84
Fits direct to Stihl saws
084, 08, 088, 075, 076, 070, 090, MS880
Fits with an adapter here > GB914 to Husky saws as below