PM-42-Sugi42 New Panther Chainsaw Mill 42″[107cm] with 42″[107cm] SG6T-3S105-A + .404 .063 120 drive links Stihl 3958 46RCX + drill bit


Add to
Stock 14
Part Number PM-42-GB42-1 Part Number PM-42-GB42-1 Category:



Chainsaw is only there for demonstration purposes only. You need to provide your own chainsaw. If you have a Husky then you will need an adapter – please see links below.

New Panther Chainsaw Mill

PM36 Comes with a 36″ GB Lo Pro Bar running Stihl PMX Lo Pro Ripping chain and Lo Pro drive rim.

PM42 Comes with a 42″ GB Lo Pro Bar running Stihl PMX Lo Pro Ripping chain and Lo Pro drive rim.

PM54 Comes with a 54″ GB Extra Long Bar running Stihl RCX Ripping chain.

PM64 Comes with a 64″ GB Extra Long Bar running Stihl RCX Ripping chain.

For saws that fit see list at bottom of the right hand column. The 42″ lo pro bar and 64″ extra long bar have been pre drilled – if the bar has not been pre drilled we will provide a drill bit for you to drill your bar.

The Panther chainsaw mill has been designed and built by Loglogic and is sold in the UK through

There are a host of other chainsaw mills on the market so why make another?
Answer – because it’s better in every possible way when compared to other mills on the market.

Designed by chainsaw millers for chainsaw millers

Re designed from the ground up – most other chainsaw mills are copied from existing designs – the Panther Mill has been re designed from scratch.

Height adjustment is tool less and fast – in fact it is the fastest compared with any other mill on the market. Simply rotate the round handle to adjust how deep the mill will cut. No need to hold a spanner in one hand while trying to adjust the mill with the other.

Attachment is the quickest of any chainsaw mill – easily bolt and unbolt your mill to your chainsaw.

Attachment to the saw is bolted not clamped – the saw can never slip in the mill.

The mill is designed to be used with special GB Lo Pro milling bars which are thinner and narrower than existing chainsaw bars for a faster, cleaner cut.

Panther Mills automatically come with a full winch set up to make milling 80% easier than pushing by hand.

There is a dedicated Panther First Cut System to ensure your first cut is table top flat. This first cut system can be extended and widened indefinitely. It is the best on the market today.

In the long term additional functionality will be built into the Panther Mill that currently does not exist anywhere else – but you’ll have to watch this space to see!


PM-36, PM-42

Fits direct to Stihl saws

044, 046, MS440, MS460 (PM-30 and PM-36 only)
MS441, MS461 (PM-30 and PM-36 only)
065, MS650, MS651
064, MS640, MS641
066, MS660, MS661

Fits with an adapter here > GB912 to Husky saws as below
61, 64, 65, 66, 70, 77, 160, 162 (PM-30 and PM-36 only)
163, 180, 181, 185, 260, 263, 266 (PM-30 and PM-36 only)
268, 272 (PM-30 and PM-36 only)
280, 281, 285, 288, 298
365, 365XP, 371, 372XP, 380, 385XP
390XP, 394XP, 395XP, 575XP, 576XP


PM-54, PM-64

Fits direct to Stihl saws
084, 08, 088, 075, 076, 070, 090, MS880

Fits with an adapter here > GB914 to Husky saws as below



Customer Reviews

Based on 1 review

Superbe simple d'utilisation fait du très bon travail

Translate »

Orders for United States of America must be a minimum of $80.

Please ensure your cart total exceeds this before checkout.

select language