SINGLE PIECE 9.5′[2.9m] – NOTE: ONLY AVAILABLE TO MAINLAND UK OFF WEBSITE. FOR OTHER PLACES PLEASE CONTACT US FOR COSTS OR BUY THE SYSTEM THAT COMES IN 2M SECTIONS.
No need to fish around for all the parts you need – this comes with the lot and you save ££ [not many to be fair – a few!]. We have revised this kit so support angle brackets are now held by 13mm bolts which are much cheaper than the adjustable handles. 4m covers most people for most logs but of course you can always add more sections to do longer logs.
2.9m gives an easier to manage one piece system but of course you can always add more sections to do longer logs. With the STANDARD RUNGS this system also runs the Panther Intersect Mill [click here for more details on this].
What you get:
- 3x FCH002C-SW 40mm 1st Cut System Rung 30″[90cm] SUPER WIDE
- 2x FCH001PQ Replacement 45mm Profile Length 9.5′
- 4x CM00-LV Panther Adjustable Levelling Support
- M13 13mm Ratchet Spanner
- D3613 13mm Ratchet Spanner
- 6x FCH0135 Large Slide Nut M8 [45mm Large Mills]
- 2x FCH0125AB Large Twisty Drop In Nut M8 [45mm Profile Large Mills]
- 13x PB-EHB First Cut System External Corner Bracket [With Fixings]
- PB-A3 3mm Allen Key
- PBA6 6mm Allen Key
- 2x CM001B Panther Mill Supports – Short [182mm], M8 Bolt and Large Slot Nut
- 2x CM001A Panther Mill Supports – Long [245mm], M8 Bolt and Large Slot Nut
- PFKH Panther Fixing Kit for HEAVY First Cut Systems
You need to overhang your log each end enough to be able to enter and exit the log easily.
Rungs are pre drilled to allow hex bolts to fix the set up to the log. These sections easily attach together so you can keep adding more and more length to your first cut system. Made of sturdy 45mm profile, pre drilled rungs made of 40mm profile. This is the full complete kit but you can always extend and widen it at a later date.