NOTE: This comes as long 2.9m[9.5′] sections. It is impossible to cross reference length with destination so for some places there may be a delivery surcharge. If this is the case we’ll let you know once we have checked and you can decide whether to go ahead or not.
Solid dynamic first cut system for chainsaw mills.
You need to overhang your log each end enough to be able to enter and exit the log easily.
Rungs are pre drilled to allow hex bolts to fix the set up to the log. These sections easily attach together so you can keep adding more and more length to your first cut system. Made of sturdy 45mm profile, pre drilled rungs made of 40mm profile. This is the bare bones kit so if you want to add further functionality check out the fixing brackets, fixing kit, levels and other accessories.
What you get:
- 3x FCH001AB1 40mm 1st Cut System Rung 8″[20cm] NARROW [Panther Cub 1st Cut Rung]
- 6x 33842 Grub Screw M8x8 Cup point
- 12x PB-EHB First Cut System External Corner Bracket [With Fixings]
- 2x FCH001N Replacement 45mm Profile Length 290cm
You need to overhang your log each end enough to be able to enter and exit the log easily.
Rungs are pre drilled to allow hex bolts to fix the set up to the log. These sections easily attach together so you can keep adding more and more length to your first cut system. Made of sturdy 45mm profile, pre drilled rungs made of 40mm profile. This is the bare bones kit so if you want to add further functionality check out the fixing brackets, fixing kit, levels and other accessories.
- Click here for the 180mm stainless fixing brackets
- Click here for the 245mm stainless brackets
- Click here for the multi bolt fixing kit
Watch the following videos for more info.
First cut systems for chainsaw mills – getting the first cut flat
New first cut rails (heavy duty) and how to use them to get a precise first cut