ECO-C-KIT Eco Milling Package 42″[107cm] LIMITED OFFER FREE WINCH KIT SALE PRICE!

$642.15

Add to
Stock 28
Part Number ECO-C-KIT Part Number ECO-C-KIT Category: Tags: , ,

If you want to cut your teeth into chiansaw milling try this combo pack which does a bit of everything.

  • Eco-42 42″ Ecomill
  • Eco-8ft-J 8ft 1st Cut System [Comes as x2 joinable 4ft sections]
  • Eco-V Vertical Mill [for bars up to 25″]
  • Eco-AO Eco Oiler
  • FREE WINCH KIT! Take the strain of chainsaw milling with this included winching kit.

A very comprehensive kit! Plus save a few ££ as well. Can’t go wrong..

42″ Ecomill. Based on the old Alaskan Mill design this mill is for those on a budget and looking to start their chainsaw milling career. Or maybe you’d like a back up mill to take the tops off logs. It will handle chainsaws with bars from 16″[40cm] to 42″[107cm].


 

  • 16″[40cm] bar will give a 8″[20cm] cutting width
  • 18″[45cm] bar will give a 10″[25cm] cutting width
  • 20″[50cm] bar will give a 12″[30cm] cutting width
  • 24″[61cm] bar will give a 16″[40cm] cutting width
  • 28″[71cm] bar will give a 20″[50cm] cutting width
  • 30″[76cm] bar will give a 22″[55cm] cutting width
  • 36″[91cm] bar will give a 28″[71cm] cutting width
  • 42″[107cm] bar will give a 34″86cm] cutting width
What size chainsaw do I need?
The bigger the better! You can mill with a longer bar on a smaller chainsaw by switching to a Lo Pro set up. Set ups are varied and you will need to do some research to see how to get the most out of your saw.

Do you need some budget wedges to go with this kit? No problem click the link here.

 

Customer Reviews

Based on 2 reviews
50%
(1)
50%
(1)
0%
(0)
0%
(0)
0%
(0)
L
Lawrence Saville
Hobbyist user - Excellent overall, couple of foibles but it is a budget kit

I've had my mill about a year now, used it when first acquired and then quite heavily recently - other events overtook milling as a priority hence the gap.

I found the assembly instructions a bit confusing at times, so look at videos of the kit in use as it's frustrating when you have to dismantle what you have assembled to insert a piece you've missed as the fasteners slide in the extrusion. However, you do get to know your mill setup quite well! I did leave the 'window' thing off as I found it got in the way of the winch but you'll need to decide for yourself

The winch is a must for ease of use and I after purchased the small triangular tang and pin end (Part Number SILVR-WEB) rather than the long aluminum bar/arm thing that came with. Much quicker easier to use. You also avoid the risk of milling the ali bar on the original option.

I have the vertical milling kit but not used yet as I'm still looking for rip chain for my smaller saw so can't comment on that.

The first cut 'ladder' works well but is only 8ft and I'm finding it's too short for run on and run off on the longer trunks so I'm about to use/adapt an aluminium ladder I have kicking about for the longer stuff. As a 2 piece, with joiners, the comes with first cut kit is very portable - which is a plus. I think you can get extenders to make it longer ?
The level adjusters on the first cut can be a bit long for larger diameter trunks and can stick up above the rail so the mill won't slide generally I found them to be a bit fussy in use, either too long or too short, so be aware. I've cut some wood packers to wedge it firm and level. I like the spikes that hold it down, be gentle at first , get it level and stable then drive them home - and check. Don't forget to set the correct milling height to compensate for the rails and then RESET for your actual cut thickness when you remove the first cut rails. (oops!)

I've just fitted the secondary oiler - see review elsewhere - and this is worth the effort as I was concerned my 36" bar might run dry. Best avoided.
Minimum cut I found it about 3/4" ish or about 20mm, I've not gone more than 65mm thick as yet (else slabs too heavy to lift!) Suggest you check the indicated depth of cut (which is in inches) against what you actually get. Mine is under indicating by about 1/4" (6mm ish ) so I set for 2 1/4 " and get a 2.5 inch/65mm actual thickness.

Be very careful when clamping the bar in the mill check and recheck and retighten to avoid getting the clamps anywhere near the bar channel and chain.

During cutting I use wedges both sides every foot or so - I have 4, the back 2 swap to the front to wedge the new cut , rinse and repeat along the cut to prevent pinching of the bar.

Obviously the mill gets to be quite a lump with a large saw and bar attached and starting the saw in the rig is fun and games.

The other information and videos on the chainsawbars site is excellent and very useful too.

Overall very pleased as a hobbyist woodworker harvesting my own felled trees, this rig at this price point is excellent value.

N
N.
Good budget milling kit

This mill gave me great results however the supplied fasteners are not very good quality. A great entry level kit

Translate »

Orders for United States of America must be a minimum of $180.

For all UK orders from Monday 25th Sept there will be no longer be a minimum order but a flat rate of £4.95+vat will be charged to all orders.

Click here for more info for shipping costs