Sale!

We have an essential info section looking at how to ID chains – why not take a look by clicking here.

Chains are not measured by stretching them out on a bench and squinting down a tape measure – chains are identified by PITCH, GUAGE and NUMBER OF DRIVE LINKS [no – not the cutting teeth – drive links and you’ll know the difference by even a cursory look at the chain ID link above].

Bars likewise are not measured the same way – manufacturers give them a set ‘length’ which is generally the sticky out bit that comes out of the chainsaw [not including the mount unless in the case of large double ended milling bars which are the exception to the rule and measured end to end].

Chain sharpening is key – if you cannot use a chain and have it cutting well until the cutters are so small they end up getting knocked off – you have plenty to learn. Watch, research, rinse and repeat. Read our article on chain sharpening by clicking here – often people get caught up in different angles and techniques – but the principles are always the same.

If you are serious about correct maintenance of your bar and chain work your way through the Oregon manual [click here] and after that check out the Stihl equivalent [click here]. Using a chainsaw for 20 years [badly] does not qualify you as an experienced user – so be the change, make the difference and keep educating yourself about these valuable yet dangerous tools.

And finally – why buy a new bar and chain without checking/replacing the drive rim or drive sprocket? [again click here if unsure on what these refer to]. Would you change the oil on your car without changing the oil filter?


95VPX Oregon Lo Pro .325 .050[1.3mm]

$0.37

Add to
Stock 3713
Part Number 95VPX Part Number 95VPX Category:

Oregon 95VPX is a well proven narrow cutting chain that has been on the market for years.


95VPX chain is part of a narrow-kerf cutting system that requires less power from the saw to cut than standard cutting systems and meets the ANSI low-kickback standard.

Features:
• Micro Chisel® cutters have small-radius working corners for excellent performance and ease of maintenance.
• Ensure you have a 1.3mm or .050″ gauge bar
• Patented Chain Steel – OREGON® OCS-01 steel is patented and provides greater durability.

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
I
Ian Andrews
Good chain

Doesn't stretch as much as some, sharpens well with a file and keeps an edge well in hardwoods. Very happy.

Translate »

Orders for United States of America must be a minimum of $80.

Please ensure your cart total exceeds this before checkout.